Bunny Family

 Howdy - MichelleO here today with the new High Hopes Stamps August release, it has some adorable images, and this image of "Bunny Family" has so many uses! 

Now it is over 100 degrees while coloring, and I was thinking of cooler temperatures, green grass and well.. SPRING. I love spring and around here we have lots of bunnies hoping around the farm. I always assume they are from one large family, so seeing this Bunny Family I just had to color them up to look like the cute little cotton tails around here. 

Colored with my Copics (colors below) and then matched up a sparkle paper from My Minds Eye. It has heavy glitter to it, love that! For my sentiment I found the High Hopes sentiment "Say Spring?" I know my ears perk up and get happy when I hear "Spring!" I punched out the sentiment with a very old EK Success ticket punch, then used a Copic around the edge to create a faux border for the ticket. 

Copic colors used - 

There are so many fabulous new images in High Hopes Stamps August 2020 release! To go along with will their great collection!! 

Dreamy Dragon

Good morning,

and welcome to my Sunday post!

This morning I'm sharing another image from the "August 2020 NEW Release" from  High Hopes Stamps!!! This adorable dragon is called "Dreamy Dragon" and the sentiment is "Mini Sentiment Set #1"

 

To begin I stamped image with Memento ink and colored with my favorite media alcohol markers. Then die cut it with a squared stitched die. I used diamond stickles and a white gel pen to embellish her. To finish my card I used some flowers from Prima and Recollection to created a cluster in the bottom left. I sprinkle some diamond stickles on my flowers, add white flat pearls and adhesive my sentiment in the corner. 

Copic List; dragon skin R20 R21 R22
dragon belly R11 R20
wings B000 B02
grass YG11 YG13
butterfly Y00 Y02 YG13 R21

Hope you have enjoy my card inspiration this morning. Thank you for visit my blog today and have a BLESS day!

Happy Birthday

Welcome Everyone;

Well the summer is just about over and another month has been and gone.  How time flies.  This adorable dragon is taking flight to deliver some birthday wishes to some lucky person.

For today's card, I used the adorable Dragon Flight from High Hopes Stamps' August 2020 Release.
This is a very CAS card.  After colouring him with Copic Markers, I trimmed the image down to a square shape and matted it on some cardstock.  It is hard to see, but the some Clear Zig Wink of Stella was used on the Dragon's wings.

Supplies used:

• Stamps: Dragon Flight - TLF023 (August 2020 Release), Large Fancy Happy Birthday - H037 -- both from High Hopes Stamps
• Paper:  XPress It Blending Cardstock; DP - Dots & Stripes - Summer (Echo Park), Swirly Fun (Your Next Stamps)
• Copic Markers:
• G24 - Willow, G21 - Lime Green, G20 - Wax Green
• BV0000 - Pale Thistle, BV00 - Mauve Shadow, BV01 - Viola
• YR16 - Apricot, YR15 - Pumpkin Yellow
• YG17 - Grass Green, YG13 - Chartreuse
• Zig Wink of Stella:  Clear
• Enamel Dots

Check out the High Hopes Stamps website to see the many and varied fun stamps.  If you need some inspiration, stop by the High Hopes Stamps Blog to see what the the HH Divas have been up to.  We post daily and would love it if you stop by and visit us.  You can also follow us on Facebook, Twitter and Instagram.

Thanks for stopping by and have a great day,

Hugs;

Just Motorin' By

  I am having some fun with a humorous birthday card I created for my younger brother (shhh don't tell him). He is celebrating a milestone birthday (he's joining the 50 club) and is also the "teaser, joker" in the family so when I saw Walker Walter in the Summer 2020 new release I had to get him for my brother's card. 

I can't lie, I giggled a lot when this card started to come together in my head......and even more so when it started to come together for real. I decided putting Walter on a slider was perfect for this card. 

After colouring Walker Walter with alcohol markers, I hand fussy cut him leaving a thin white border and set him aside. I decided some grey wood patterned paper with a touch of blue was perfect for the base of my masculine themed card. The light grey sponged look paper fit perfectly in to my plan and after cutting it to size, I used a slider die to cut the "track".

Some cloudy blue sky paper in the background helped complete my mini scene and I added some extra clouds just for fun. This piece is popped up using foam pop dots so the slider will move. Next, I cut the balloons and although it is hard to see on the photo, there is some clear sparkle pen on them just to add a smidge of sparkle. 

I put the balloons on an angle so when he is moved across the card the balloons are "flowing" with him. Some twine and enamel dots finish off my card. 

Card Recipe 

Stamp: Walker Walter - High Hopes Rubber Stamps

Sentiment: Just Motorin' By - High Hopes Rubber Stamps

Patterned Paper: Indigo Skies - Kaisercraft

Tuxedo Black Memento ink, Hammermill 100lb digital cover stock, slider die - Die-namics, clear Spectrum Sparkle Pen, circle die, balloon die - Gina Marie Designs, cloud die - Die'Sires, enamel dots - Gina Marie Designs, 3D foam pop dots - Forever In Time

 Copic and Spectrum Noir Markers:

Walter - E00 E21 E11 

Jeans - TB8 BT9 TB9 

Short - B00 B02 B04

Shoes - EB3 EB6 EB5 

Walker - C1 C3 C5 C7 C9

Horn - C1 C3 C5 YG01 YG03

Tennis Ball - YG01 YG03

                                                               

Thanks for stopping by! Have a super fantastic day!

Wishing you blessings!

 Happy Wednesday HH Fans!!

I LOVE pigs....if I had a farm I would have a whole entire pen full of them.  I think they are just the cutest things...okay maybe a little dirty but dirt never hurt anyone right!

For today's card I used two different main images "Miss Peggy" & "Soo-eet Petunia & Audrey".  I wanted to turn this into an inspirational card so I chose the sentiment called "Too Many to Count".  I just think these days we have so much to be thankful for in our lives.  It may not be perfect or how we think it should be but it is what it is & personally I'm thankful for that.

 

Copic Combos

Miss Peggy - R02, R01, R000, R0000, C6, C4, C2, E000, E00, E01

Soo-eet Petunia & Audrey

Pig - R02, R01, R000, R0000, E00, E000, E01, W6, W4, W2

Audrey - E11, E01, E00, E000, RV19, RV17, RV14, RV11, RV10, E53, E51, E50, YR21, W6, W4, W2

Some ribbon & enamel dots finished off this card.

Thanks so much for stopping by today!

Crafty hugs,

 

 

 

Time to Smell the Flowers!

It’s Wednesday, and this week, I used Daffodil Bunny - SLF006 (High Hopes Rubber Stamps) for the main image from the new August 2020 release and Smell The Flowers - G189 (High Hopes Rubber Stamps) for the sentiment. This adorable little bunny is taking time out to smell the flowers. We have a really nice garden of flowers that my husband takes care of. I'm not a green thumb at all. LOL! It's always nice to take a moment and enjoy the beauty of them.

To make my card this week, I started out with a simple white card base, sized at 6" x 6". The base background was also cut at 6" x 6" using Craft Consortium - Cottage Garden paper and then inked around the edges with Tim Holtz Distress Ink - Fossilized Amber. I just thought this paper went so well with this adorable image. I added the 2 colours of ribbon with some 2-sided tape and then adhered the entire background paper to the base with 2-sided tape.

The scalloped circle and inside image circle were both die cut using my Cuttlebug and Craftin Desert Diva's Stitched in Circle Dies. The circle in between the 2 of them was die cut with Lifestyle Crafts Cutting Dies - Nesting Circles. The edges of the large scalloped circle were inked with Tim Holtz Distress Ink - Picked Raspberry. For the sentiment, My Creative Time - Rectangle Frame Dies were used. The die was larger in depth, so I just die cut one side and then turned it around and only put it part way through my Cuttlebug to cut the other edge. It too, was then inked around the edges with Tim Holtz Distress Ink - Fossilized Amber. The image was coloured with Copic Markers.

To assemble the remainder of the card, the mid circle was attached directly to the large scalloped circle and then popped up with 3M VHB - 2 sided tape. The image and sentiment were popped up on top with 3M VHB - 2 sided tape as well.

Card Recipe:

Stamp: Daffodil Bunny - SLF006 (High Hopes Rubber Stamps)
Sentiment: Smell The Flowers - G189 (High Hopes Rubber Stamps)
Inks: Memento - Tuxedo Black, Tim Holtz Distress Ink - Fossilized Amber, Tim Holtz Distress Ink - Picked Raspberry
Paper: Copic Marker X-Press It Blending Card, Momenta - Cardstock, Crafts Sparkling Stickers - 02-3068629, Craft Consortium - Cottage Garden 6"x6"
Die Cuts: Craftin Desert Diva's Stitched in Circle Dies, Lifestyle Crafts Cutting Dies - Nesting Circles, My Creative Time - Rectangle Frame Dies
Tools: MISTI - Most Incredible Stamping Tool, Cuttlebug, 3M VHB - 2 sided tape

Image coloured with Copic Markers:

Bunny: E37, E35, E34, E33, E31, E30, R11, R02, R000
Bow: RV19, RV17, RV13
Grass and Greenery for Plants: BG99, BG97, G21, YG17, YG13, YG07, YG03, YG01
Daffodil: E15, Y38, Y18, Y04
Clouds and Sky: B60, B01, B00, B000, B0000, C0, Colorless Blender

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

From Our Gnome To Yours!

It's Tuesday!!

Tuesday means that I am over on the High Hopes Blog sharing another card! Meet "Snowy Gnome" from the August 2020 release over at High Hopes Stamps. Gnomes are all the rage right now and Snowy Gnome fits right in with the "gnome obsession"! I was in love with Gnomes and Fairies growing up, and I think that's why this guy holds a special place in my heart!

I stamped and coloured "Snowy Gnome" with my Copic markers and cut him out using my Brother Cut N Scan. I love these papers from the Polkadoodles "Ho Ho Gnome" 6x6 collection. I want to hoard this paper but "Snowy Gnome" deserved to be used on them! The HH Sentiment called "From Our Gnome" is just perfect for this card! I cut it in half and used the other part of the sentiment on the inside of my card. 

Here's the decorated inside with the other half of the "From Our Gnome" sentiment.

Copics Used:

Skin: E00, E21, E95, R20

Beard: W1, W3, W5

Outfit: R37, R59, R89/ YG93, YG95, YG97/ W5, W6, W7 (boots)

Holly: R35, YG63, YG67

Birds: R35, R37, YR07, W5, W7, YG93, YG95

Snow: B0000, B000

I hope you'll head on over to the High Hopes website and see the New Release images! You can find more inspiration from the Design Team by visiting our Blog and Facebook page!

Happy Stamping!

Bossie's Bad Mood

 Happy Monday HH fans!

Okay so who likes Monday's?  Not so much right!  With all the happenings in the World right now I bet we all have friends & family that just need a little pick me up.  This adorable little cow image is called "Bossie's Bad Mood" (perfect for how a lot of us feel right now).  I have paired this with the simple sentiment "Hang In There" & propped Bossie up on the "Bale O' Hay" image.

 

Copic Combos

Cow - C6. C4, C2, C1, C0, R02, R01

Hay - YR24, YR23, YR21

I fussy cut out both my main images & inked the edges with a black marker.  These images are simple & easy to color which make for a quick card.  I added some enamel dots & ribbon from my stash to finish off the cutie.

Thank you for popping in today!

Crafty hugs,

 

 

 

Dreamy Dragon

 Howdy - MichelleO here today - How can you not love a a sweet "Dreamy Dragon" this cute? He is from the new release at High Hopes Stamps. Adorable! 

Used Copics (colors below) and pencils to color up this cutie. Went with light pastel colors as he is so cute and all. And for added fun Nuvo sparkles so he shines and has bling. And since this felt like it needed more sparkle I found papers from Paper Studios that has lots of sparkle to it. All the layers are sewn down and then the High Hopes Stamps sentiment "Lg. Fancy Happy Birthday" 

Copic colors used - 

Fun bright card for anyone's birthday. For LOTS of great images to play with! Click HERE to get there fast and find lots to color! 

Hope you enjoyed! 

Gnome And Snowman Friend

Good morning,

I'm really please how my Christmas Card turned out. I Love this image from the "August 2020 New Release" from High Hopes Stamps!!! I used almost every snowflake dies I own. 

I began by stamping "Gnome And Snowman Friend"
 from High Hopes Stamps and coloured with alcohol markerts. I die cut my main panel with one of my square stitched die set. This beautiful traditional Christmas paper was a gift for me so I apologies! I don't know the paper named of what collection is from.

I die cut my pattern paper using my stitched dies and adhesive and layer then some with foam tape to give a bit of dimension. I add diamond stickles on the snowman and snow. Also used my gel pen to doodle some lines.

Here is a close up!
To finish my card by adding a banner and a cluster of snowflakes in the left top corner. I also adhesive some gold sequins. Hope you have enjoyed my card today.  

Thank you for visit my blog today!

Have a BLESS day.

Celebrate the Magic of Christmas

Hi Everyone;

August is almost over, and it's time to start making some Christmas Cards as Christmas will soon be here.  For today's post, I have used the adorable Snowy Gnome from High Hopes Stamps August 2020 Release.

After colouring the stamped image with Copic Markers, I used a Wonky Stitched Square Die to cut it out.  Some ribbon, gumdrops and a snowflake with some Fresh Snowfall Glitter Ac cents from  Nuvo Glitter Accents.

Supplies used:

• Stamps:  Snowy Gnome (TLF024) -- August 2020 Release, Magic of Christmas (H258) -- both from High Hopes Stamps
• Paper:  XPress It Blending Cardstock, DP - Peppermint Kisses  - Kaisercraft
• Copic Markers:
• Skin:  E0000 - Floral White, E000 - Pale Fruit Pink, E00 - Skin White, E01 - Pink Flamingo
• Beard:  W00 - Warm Gray No. 00, W0 - Warm Gray No. 0, W1  - Warm Gray No. 1, W2 - Warm Gray No. 2, W3 - Warm Gray No. 3
• Top:  R46 - Strong Red, R29 - Lipstick Red, R27 - Cadmium Red
• Pants:  G46 - Mistletoe, G43 - Pistachio
• Other:  BG0000 - Snow Green, BG000 - Pale Aqua
• Die:  Wonky Stitched Square Die - Gina Marie Designs
• Miscellaneous:  Ribbon, Wooden Snowflake with Fresh Snowfall a Glitter Accent from Nuvo
• Your Next Stamp Gumdrops

Check out the High Hopes Stamps website to see the many and varied fun stamps.  If you need some inspiration, stop by the High Hopes Stamps Blog to see what the the HH Divas have been up to.  We post daily and would love it if you stop by and visit us.  You can also follow us on Facebook, Twitter and Instagram.

Thanks for stopping by and have a great day,

Hugs;

Wagon Full of Blessings

Happy Thursday HH fans!

I think we could all use a little hug & a blessing right now.  This has been one of those years for the record books.  BUT we all still have so much to be thankful for, I know I do.

This sweet image is called Wagon Full of Blessings which I have paired with our Happy Thanksgiving sentiment.

 

 

Copic Combos

Pumpkin - YR27, YR18, YR16, YR15

Grass - G46, G43, G40

Girl's Top & Boot - BV08, BV04, BV02

Boy's Pants & Hat - B39, B37, B34

Girl's Pants - B18, B16, B14

Boy's Sweater, Hat, Patch on Pants - BG99, BG96, BG93

Skin - E000, E00, E01, E04 & R01

Hair - E31, E53, E51, E50

Boy's Shoes - T9, T7, T5, T4, T2, T0

Wagon Wheels & Handle - C8, C6, C4

Wagon - R89, R37, R39 

Thanks so much for popping in!

Crafty Hugs,

Friends Are We

 Social bubbles and social distancing are still very much part of our lives which makes it hard to meet up with friends whom we haven't seen for awhile or live far away. 

I am missing my friends and have been making some cards that I can send to them just to let them know that I am thinking about them. The newly released Dreamy Dragon is adorable and perfect for a missing you, thinking of you card that I can easily pop in the mail and hopefully bring a smile to one of my friends.

I coloured this cutie with alcohol markers, cut him out using a stitched tag and popped him up with foam dots. The tag is much longer then I needed so I placed the die on top of the die cut image to the size I needed and it ran it through my Big Kick a second time. 

I found some bright, cheery patterned paper from Photo Play, Lawn Fawn and Echo Park in my stash that keep the feel of this card happy and bright. Some ribbon in the tag hole and enamel dots finish off my card.

Card Recipe 

Stamp: Dreamy Dragon - High Hopes Rubber Stamps

Sentiment: Friends Are We - High Hopes Rubber Stamps

Patterned Paper: About A Little Girl - Photo Play, Dots and Stripes - Echo Park, Spiffy Speckles - Lawn Fawn

Tuxedo Black Memento ink, Hammermill 100lb digital cover stock, stitched tag die - Tutti Designs, enamel dots, ribbon, 3D foam pop dots - Forever In Time

 Copic and Spectrum Noir Markers:

Dragon - G07 DG3 JG6 YGO3 CG1 DG3

Butterfly - E31 CT1 Y35 Y38

                                                               

Thanks for stopping by! Have a super fantastic day!

Butterfly Hi!

It’s Wednesday, and this week, I used Butterfly Chick - SLF007 (High Hopes Rubber Stamps) for the main image from the new August 2020 release and Flutter'in By - F004 (High Hopes Rubber Stamps) for the sentiment. This little butterfly has decided to take a moment to say "Hi" to this adorable little chick. Have you taken a moment to call someone and just "Hi" today?

To make my card this week, I started out with a simple white card base, sized at 6" x 6". I used the retired die cuts from Craftin Desert Diva's - Inside Scalloped Squares and a mixture of Momenta - Cardstock and American Crafts - Basics paper for my background. The same die cut was also used to cut the Copic Marker X-Press It Blending Cardstock. The Copic paper was then stamped on with my MISTI and Memento - Tuxedo Black ink. I coloured in the image with Copic markers.

For the assembly of the card, I first placed down the large background using 2-sided tape. Then I added in the 1st yellow inset using glue as it was easier to move around and get it into place. Lastly, I added in the last inset for the large scalloped square. For the smaller square, the coloured image and yellow cardstock were turned over and then taped together with some Scotch Tape. Then 3M VHB - 2 sided tape was used to pop it up into the centre of the larger square.

The sentiment was stamped with Memento - Tuxedo Black and then die cut with My Creative Time - Rectangle Frame Dies. Tim Holtz Distress Ink - Fossilized Amber was used to go around all of the edges. Then the sentiment was also popped up with 3M VHB - 2 sided tape.

To finish off the card I added on some butterflies and also a few Kraftin' Kimmie - Polar Dots in a few places.

Card Recipe:

Stamp: Butterfly Chick - SLF007 (High Hopes Rubber Stamps)
Sentiment: Flutter'in By - F004 (High Hopes Rubber Stamps)
Inks: Memento - Tuxedo Black, Tim Holtz Distress Ink - Fossilized Amber
Paper: Copic Marker X-Press It Blending Card, Momenta - Cardstock, American Crafts - Basics (6"x6", 15.2cmx15.2cm)
Die Cuts: Craftin Desert Diva's - Inside Scalloped Squares, My Creative Time - Rectangle Frame Dies
Tools: MISTI - Most Incredible Stamping Tool, Cuttlebug, 3M VHB - 2 sided tape, Kraftin' Kimmie - Polar Dots, Butterfly Stickers - 02-3051386

Image coloured with Copic Markers:

Chick and Bow: Y17, Y15, Y13, YR18, YR16, YR14, YR12, B18, B16, B14, BV00, BV000
Grass: YG17, YG13, YG03, YG01
Butterfly: E79, E77, E71, B18, B16, B14, BV08, V05, V04, Black (100), Gelly Roll Sakura #8 Pen
Clouds and Sky: B60, B01, B00, B000, B0000, C0, Colorless Blender

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Good Times!

Hello Friends!

Who doesn't love a group of bunnies, especially these cuties!! Although..... I have to admit a "group" of bunnies in my garden is not ideal. They are eating like Kings LOL! But in the Spring the baby bunnies are just adorable! This image called "Bunny Family" is from the August 2020 Release over at High Hopes Stamps! I just love all the expressions on their faces!

I coloured each bunny differently using my Copic Sketch markers. Then using my Brother Cut N Scan, I cut around the image and also made a background layer. I popped the image up with foam squares for added card dimension. I used papers from the Doodlebug "Fun In the Sun" 6x6 collection. I used the High Hopes sentiment called "Good Times". All the bows have some Wink of Stella clear pen added to them. A cute ribbon bow (Thanks Donna) and some enamel dots finish off my card!

Copics Used:

Bunny #1: C2, C3, C5, C7/ BG45, BG53, BG57

Bunny #2: E31, E33, E35, E37/ R89, RV17, RV19/ YR04, YR07, YR09, YG11, YG13

Bunny #3: E40, E41, E43

Bunny #4: E43, E44, E47

Bunny #5: W2, W3, W5/ G28, YG17, YG25

Ears and Cheeks: R01, R02/ R20, R22

Ladybug: R24, C9

Sky: B0000, B000, B00

You really should head on over to  High Hopes Stamps and check out the August 2020 Release! Or you can always check out our Facebook page or the High Hopes Blog to see what the Design Team is creating with the New Release.

Thanks for stopping by!

Happy Stamping!

Angel Bear Witch

 

Happy Tuesday everyone!

I know you are all probably thinking is this gal crazy it's only August...why is she posting a Halloween card?!  The answer to that if you know me would be....I better get it done now while I have it on my mind.  Seriously if I wait I will forget & I do like to send out a few Halloween cards OR I use my images in my scrapbook pages.  Halloween is one of my fav things to scrapbook.  I'm in love with the colors.

This adorable image is called Angel Bear Witch & I have paired it with a very simple Happy Halloween sentiment stamped in a light purple.  I was quilting before I made this card so that's where the idea for the strips came from on the CAS card.

 

Copic Combo's

Black - C10, C8, C6

Purple - V09, V06, V05

Yellow - Y17, Y15, Y13

Wings - V05, V04, V01

Pumpkin - YR27, YR18, YR16, YR15

Cat - N6, N4, N2, N1 & R02

Fur - E44, E43, E42, E41

Nose & Ears - R02, R01

Thanks so much for visiting today!

Crafty hugs,

 

Gnome and Snowman Friend

 Howdy, MichelleO here today and I'm cooling off from the summer heat by coloring up a snowman! One of the new August Release image from High Hopes Stamps is the cutest "Gnome and Snowman Friend" 

Used my Copics (colors below) and pencils to color up my new friends. For some reason I went more country than traditional holiday winter colors. But I guess Gnomes have to dress year round right? I sewed down my image to a piece of kraft card stock and found papers from My Minds Eye to use and sew down on the same kraft card stock base. I like how the darker colors make the snowman pop a bit! For the sentiment I found a PERFECT sentiment - High Hopes Stamps "Work of Art"  Love this one with my snowman images ... it has heart! 

Copic colors used - filled my cup this time! Had lots of fun coloring! 

It is so fun to have new images to play with! And High Hopes Stamps have had some great ones... to see this newest release pop over HERE and you will find lots to fall in love with! 

Hope you enjoyed - 

Dragon Flight!

Good morning,

Today I'm excited to share another new image from "High Hopes Stamps" NEW August 2020 Release!

I began by stamping "Dragon Flight" with black ink. I colored the image using alcohol markers. Them fussy cut it leaving a small white border. I cut my circles using die from my stash. The paper flowers are from Prima and some from my stash too.

Copic Used; body Y00 Y11 Y13 Y15

wings R20 R21 R22

flower BG000 BG01 R20 R21

To finish I added crystal stickles white pen and light yellow enamel dots. I hope you enjoyed this project today!

Thank you for visit my blog today!

Have a BLESS day.

Getting ready for fall!

 

Happy Friday everyone!

I started thinking that August was about half done already & that meant that Fall would be here before I was ready for it.  So I made up this little card using Angel Bear Pumpkin Costume.  I paired this adorable image with If Friends Were Pumpkins.

 

 Copic Combo

Pumpkin - YR27, YR18, YR16, YR15

Bear - E39, E37, E35, E33, E31, R02, R01

Pumpkin Stalk - E87, E84, E81

Nose & Pumpkin Face - T7, T4, T3

Blue - B39, B37, B34, B32

To keep this cutie clean & simple I just layered the card up, popped my image up on foam dots and added some enamel dots.

Thanks so much for poppin' in today!!

Crafty hugs,

 

 

Hugs to Cheer You!

Welcome Everyone;

Another week has been and gone and Friday is here again.  For today's card I have used the adorable Butterfly Chick from High Hopes Stamps August 2020 Release.

After colouring the image with Copic Markers, I cut it out using the Circle Pleated Die.  Some ribbon, flowers, and enamel drops finished off the card.

Supplies used:

• Stamps:  Butterfly Chick - SLF007 -- August 2020 Release, Hugs to Cheer You -- E055 both from High Hopes Stamps
• Paper:  XPress It Blending Cardstock, DP - Simply Spring -- Doodlebug
• Copic Markers: 
• YG17 - Grass Green, YG13 - Chartreuse, YG11 - Mignonette
• YR16 - Apricot, YR15 - Pumpkin Yellow
• Y18 - Lightning Yellow, Y15 - Cadmium Yellow, Y13 - Lemon Yellow
• B000 - Pale Porcelain Blue, B02 - Robin's Eggs Blue
• G0000 - Pale Green, G000 - Crystal Opal, G00 - Jade Green
• N0 - Neutral Gray No. 0, N2 - Neutral Gray No. 2, N3 - Neutral Gray No. 3
• Dies: Fishtail Banner - Your Next Stamp; Pleated Circles - Gina Marie Designs
• Nuvo Crystal Drops - Morning Dew
• Miscellaneous: Ribbon, Flowers, Enamel Dots

Check out the High Hopes Stamps website to see the many and varied fun stamps.  If you need some inspiration, stop by the High Hopes Stamps Blog to see what the the HH Divas have been up to.  We post daily and would love it if you stop by and visit us.  You can also follow us on Facebook, Twitter and Instagram.

Thanks for stopping by and have a great day,

Hugs;

 -

Daffodil Thanks

 Sometimes saying thank you isn't enough when someone has done something special or over the top for me so I like to send a card so they know how much what they have done means to me. 

Daffodil Bunny from the new August 2020 release is perfect for so many different types of cards but for this time it is perfect to say a huge thank you! 

After stamping and colouring my image I cut it out using a circle die and my Fiskars circle cutter for the card stock circle behind. I used one of the MFT Blueprints 24 sketches for the design. I added some sequins and glitter enamel dots in kind a flowing pattern and a matching ribbon bow to finish off my card. 

Card Recipe 

Stamp: Daffodil Bunny - High Hopes Rubber Stamps

Sentiment: Lg. Script Thank You - High Hopes Rubber Stamps

Patterned Paper: Welcome Home - Carta Bella, Make A Splash - Bo Bunny, Petal Lane - Bo Bunny

Tuxedo Black Memento ink, Hammermill 100lb digital cover stock, circle die, Fiskars circle cutter, ribbon - Stampin' Up, sequins, glitter enamel dots 

 Copic and Spectrum Noir Markers:

Bunny - C0 IGI IG3 RV000 RV11

Bow - RV11 RV32 RV34 

Flowers - CT1 CT4 Y35 YG03 YG63 YG67

                                                               

Thanks for stopping by! Have a super fantastic day!